It's that time of year again — the leaves are changing, the air is getting colder, and it's finally starting to feel like autumn. This also means that it's time to start draining your above-ground pool.

We will walk you through the 5 easy steps for draining a pool above ground. We'll answer all of your questions along the way, so you can be sure that the process goes as smoothly as possible.

Also, check out the above-ground pool filter pump at ByRossi if you want to not only clean your pool and get rid of debris but also make the water crystal clear.

Why Drain Your Above-Ground Pool?

There are several reasons why you might need to drain your pool:

• To clean the pool — the easiest way to clean your pool is to drain it and scrub the sides and bottom. For best results, you can also use an automatic pool cleaner.

• To winterize— if you live in an area where freezing temperatures are common, draining the pool is an important step in winterizing it.

• To move the pool — if you are moving your pool to a new location, you will need to drain it first.

How to Drain an Above-Ground Pool: 5 Easy Steps

The process of draining an above-ground pool is not as difficult as it may seem. With a few simple steps, you can have your pool drained in no time. Here are the five easy steps to follow:

Step 1: Plan Where the Water Will Go

Before beginning to drain your pool, it is important to plan where the water will go. You will need a way to direct the flow of water so that it does not cause any damage.

If you have a garden or other landscaping features near your pool, the drained water can be directed there. If you do not have an appropriate place to send the water, you will need to set up some temporary drainage. This could involve using buckets or pots to redirect the water away from your pool area.

Make sure that you have a plan in place before beginning the draining process, as it is important to keep the flow of water under control.

Step 2: Pick Your Method

There are two ways to drain an above-ground pool: the manual way and the automatic way. The manual way is simply using a garden hose to release the water from the pool. The automatic way uses a pump to suck out the water.

Which method you choose will depend on how much work you want to do and how much money you want to spend. The manual way is free, but it takes a lot of time. The automatic way costs money, but it's much faster.

To choose the right method for you, consider how big your pool is and how much water needs to be drained. If your pool is small or if there isn't that much water to drain, the manual way will work just fine. But if your pool is large or if there's a lot of water to drain, the automatic way is a better option.

Step 3: Start Draining the Water

Now it's time to start draining the water. The easiest way to do this is by using a submersible pump. Plug the pump into an outlet and insert the hose into the pool drain. Turn on the pump and wait for the water to start flowing out of the pool.

If you don't have a submersible pump, you can use a regular pump or even a bucket to drain the water. Just be sure to have something to catch the water as it drains out.

Once the pool is drained, remove the hose from the drain and plug in the pump. Turn it off and disconnect it from the outlet.

Step 4: Remove the Excess Water

It's time to remove the excess water from your pool. You can do this by using a submersible pump or siphon. 

If you're using a submersible pump, just place it in the deep end of the pool and turn it on. The water will be sucked up into the pump and expelled through the discharge hose. 

If you're using a siphon, you'll need to place the siphon hose in the deep end of the pool and lower the other end into a bucket or container. Suck on the mouthpiece to start the flow of water, then release it to stop it. Keep doing this until all of the water is drained from the pool.

Step 5: Dry out Your Pool

After you have drained your pool, it's time to dry it out. This is an important step, as you don't want any water left in the pool that could lead to rust or other damage. You can use a few methods to do this:

• Use a leaf blower to blow all of the water off of the surface of the pool;

• Use a broom to sweep all of the water off the surface of the pool;

• Pour some sand on the surface of the pool and then sweep it into a pile. The sand will help absorb any remaining water.

Once you have removed all of the water from your pool, make sure to cover it with a tarp or pool cover to protect it from the elements.

Now that your pool is drained and dried, you're ready to store it for the winter!

Conclusion

Draining your above-ground pool is a fairly easy process that can be completed in about a few steps. Be sure to have all of the necessary supplies on hand before you get started, including a garden hose, water pump, and pool cover. 

Also, be sure to review the owner's manual for your pool before draining it, as each model may have specific instructions on how to properly drain it. Following the simple steps described above should help make the process a breeze and have your pool ready for the summer season.